Beurer TL95 Floor Standing Daylight Lamp for Sad Therapy

Product information

Brand

Beurer

Product code

IAS-LGT-BEU-0178

All Boots Sub-categories

light therapy, wake up & SAD lights

Product Type

light therapy

Rating (/5)

4.56

Reviews

9

Boots Item Code

10366902

Country of Origin

China

How to Use

Press and hold the On/Off button 5 for 2 seconds. When the device is next switched on, it will start with the saved brightness level and treatment time. The TL 95 Daylight therapy lamp indicates your current treatment time using 4 LEDs. The treatment time can be set at the following 4 levels. The timer function will not be active when the lamp is switched on for the first time. The lamp now runs until it is switched off again or a treatment time is set (timer = 0 min). In order to use the timer, set the desired level from 1 to 4 by pressing briefly the On/Off button 5 . Level 1 sets a treatment time of 30 minutes. Treatment time Level (Number of lit LEDs): - 30 minutes - Level 1 - 60 minutes - Level 2 - 90 minutes - Level 3 - 120 minutes - Level 4 The lamp switches off automatically after this treatment time and steadily becomes darker. To deactivate the timer function, briefly touch the On/Off button until the LEDs go out. The TL 95 Daylight therapy lamp has 6 brightness levels. The desired brightness level can be set using the flower button on the side – this level should be set so that it is pleasant for the eye during the treatment. Settings 1 to 6 correspond to 25%, 33%, 43%, 57%, 75% and 100% intensity respectively. When the device is switched off, the last level that was set is saved. Note: • The device can also be used as a reading lamp from level 1.

Hazards & Cautions

• The daylight therapy lamp is intended for radiation on human bodies only. • Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address. • Ensure that the daylight therapy lamp is positioned on a stable base. • The device must only be connected to the mains voltage that is specified on the type plate. • Never submerge the device in water and do not use it in the wet rooms. • Do not use the daylight therapy lamp on animals! • Do not use device on patient is taking a photosensitizing medication or herb. Do not use device on: - children under age 3 - people insensitive to heat - people with skin lesions due to illness - people that has a condition that might render his or her eyes more vulnerable to phototoxicity - people that have a photosensitive skin condtition • Keep packaging material away from children (risk of suffocation). • If the device is warm, do not cover it or pack and store it. • Always unplug the mains adapter and allow the device to cool down before touching it. • Do not touch the device with wet hands when it is plugged in and do not allow water to spray on the • device. Only operate the device if it is completely dry. • Ensure that you only insert and remove the mains adapter with dry hands and that you only press the • On/Off button with dry hands. • Keep the mains cable away from hot objects and naked flames. • Protect the device from heavy impacts. • Do not pull the mains adapter out of the socket using the mains cable. • Do not use the device if it shows signs of damage or does not function properly. In such cases, contact Customer Services. • Do not leave the equipment unattended when it is switched on to avoid the risk of fire or burns. This equipment is not intended for use by children under three years. Children under three years should be supervised to ensure that they do not play with the equipment to avoid the risk of fire and burns. • If the wall socket used to power the equipment has poor connections, the plug of the equipment becomes hot. Make sure you plug the equipment into a properly installed wall socket to avoid the risk of fire and burns. • Do not subject the equipment to heavy shocks to avoid risk of damage to the lamp. • In the event of damage to the mains connection cable for this device, the cable must be disposed of. If it is not a removable cable, the device must be disposed of. • Disconnection from the power supply network is only guaranteed when the mains adapter is unplugged. • Do not use the device in the presence of flammable anaesthetic gas connections with air, oxygen or nitrogen oxide. • No calibration and no preventive checks or maintenance need to be carried out on this device. • You cannot repair the device. The device contains no parts that you can repair. • Do not make any changes to the device without the manufacturer's permission. • If the device has been changed, thorough tests and checks must be carried out to ensure the continued safety of the device for any future use. • To avoid strangulation and entanglement, keep cable out of reach of young children. • The device is intended for use by the patient themselves. The device and accessories must be used in accordance with these instructions for use.

Important Info / Manufacturer

Country of Origin: China Address: UK: Beurer UK Limited, Suite 16 Stonecross Place, Stonecross Lane North, Lowton, WA3 2SH www.beurer.com

Product descriptions and usage information are preserved from the supplied catalogue. Always follow the manufacturer’s current instructions and safety information.